台灣無線電俱樂部 TAIWAN RADIO CLUB ( TRC )

標題: ic-2410H中繼要按那個鍵? [打印本頁]

作者: 紅螞蟻 時間: 2012-2-26 21:21
標題: ic-2410H中繼要按那個鍵?
請問友台有人知道ic-2410H做中繼要怎麼按嗎?
說明書找不到,電子檔說明書好像沒有提到.
感謝!

作者: WSUgocouars 時間: 2012-2-26 21:28
(IC-2410) Cross-band repeat
An edited version from an ICOM info sheet)
1. Set frequencies for both UHF and VHF. If necessary, set transmit offset and tone.
2. Hold the "BAND" switch and the "SET" switch. The memory number display will flash the letter "L". This indicates the 2410
is in the "Mini Repeater" mode.
3. Transmission by PTT is possible. If PTT is operated, the band which is indicated by the flashing decimal point will be
transmitted on. This can be done even when in "Mini Repeat" mode. In other words, PTT has priority over the "Mini Repeat"
operation.
Transmitted band will be switched by the "UP" or "DN" key on the microphone. The flashing decimal point will indicate
which band will be transmitted on.
4. Mini Repeater function will remain even when power is turned off. To disable repeater function, hold the "SET" key until the
flashing "L" disappears.

作者: 紅螞蟻 時間: 2012-2-26 21:51

WSUgocouars 發表於 2012-2-26 21:28
(IC-2410) Cross-band repeat
An edited version from an ICOM info sheet)
1. Set frequencies for both U ...

會了,真的太久沒用了!感謝!

作者: BM4JJJ 時間: 2012-2-27 09:59

WSUgocouars 發表於 2012-2-26 21:28
(IC-2410) Cross-band repeat
An edited version from an ICOM info sheet)
1. Set frequencies for both U ...

感謝保哥熱情提供...

歡迎光臨台灣無線電俱樂部 TAIWAN RADIO CLUB ( TRC ) (https://radio.club.tw/)